The equipments that were used in this project are: BMP280 sensor, BH1750 sensor, Breadboard, Orangepi, Wires, LED, resistors, Driver ULN2003 and pushbuttons. And the application terminal that i used was visual studio code.
The End Goals:
For more details about this particular project you can download the documentation and watch the youtube video below
I made a robot car using an Arduino. The robot can move forward, backward, turn left, and turn right. It has obstacle avoidance capabilities using an ultrasonic sensor, and it can also be controlled via Bluetooth and voice commands. You can watch the short creation on youtube by clickingtouching the youtube icon
